Installation Of The Control Panel - Vitrifrigo MACS 7 Serie Manuel D'installation

To connect the line ground wire to the pin (pos 5 in the figure 8). The line ground wire must be fixed with M4
nut as showed in the figure 10 (image below).
Fig. 10 (Line ground wire MACS)
9.2

Installation of the control panel

The standard control panel of the air conditioner is inserted in a 3-module Vimar Idea series wall mounting
support and must therefore be recessed mounted on a wall of the room to be conditioned. A hole is required
such as the one shown in the figure below.
Fig. 11 (drilling for the control panel)
75