Controls; Features - GE Spacemaker DSXH43 Manuel De L'utilisateur

About the dryer control panel.
FABRIC CARE
PERM. PRESS KNITS/DELICATES
MED HEAT LOW HEAT
COTTONS AIR FLUFF
REG. HEAT
Control Settings
Start
Turn the START knob clockwise to ON. Hold for 1–2 seconds and release. Opening the door during
operation will stop the dryer. To restart the dryer, close the door, turn the START knob clockwise to
ON, and hold for 1–2 seconds and release.
Fabric Care
COTTONS For regular to heavy cottons.
REG. HEAT
PERM. PRESS For synthetics, blends, delicates and items labeled permanent press.
MED HEAT
DELICATES
LOW HEAT
AIR FLUFF For fluffing items without heat. Use the TIMED DRY cycle.
NO HEAT
Drying Cycles
Automatic cycles automatically sense fabric dryness. Select MORE DRY for heavier fabrics, LESS DRY
for lighter fabrics in the AUTOMATIC COTTONS cycle. The TIMED DRY cycle will run for a selected time.
Select START to begin the AUTOMATIC PERM PRESS & DELICATES cycles.
AUTOMATIC For cottons and most linens. For most loads select the Preferred Setting.
COTTONS
TIMED DRY Set the Cycle Selector at the desired drying time.
AUTOMATIC For synthetic blends and delicates.
PERM PRESS
& DELICATES
6
CYCLE SIGNAL
OFF ON
NO HEAT
Features and appearance may vary.
KNITS/ For delicates, synthetics and items labeled tumble dry low.
AUTOMATIC
START
COTTONS
ON
MORE
DRY
EXTRA
CARE
AUTOMATIC
PERM PRESS
& DELICATES
Preferred Setting
TIMED DRY
COOL
DOWN
LESS
70
DRY
60
50
40
30
20
10
COOL
START
DOWN