Frequently Asked Questions - Haussmann CGT24U Manuel D'utilisation

OPERATING INSTRUCTIONS

FREQUENTLY ASKED QUESTIONS

1. Why does the trimmer handle get warm
during extensive use?
Under normal load condition the trigger and
body will become warm because the battery
produces heat as it releases the energy
required to run the tool. This is normal.
2. The battery gets warm during use.
Why?
The power draw from the battery generates
heat. This is increased as the energy draw
is increased. The battery pack will not be
damaged. This is normal.
3. I cannot fit the battery into the battery
charger. Why?
The battery can be inserted into the charger
only in one direction. Turn the battery around
until it can be inserted into the slot, the red
LED light should turn on when the battery is
charging.
4. Reasons for different charging times.
Your charge time can be affected by many
reasons - which are not defects in your product.
If the battery pack is only partly discharged it
may be re-charged in less than 3 hours. If the
battery pack and ambient temperature are
very cold then re-charging may take 3 to 3 1/2
hours. If the battery pack is very hot it will not
re-charge because the internal temperature
safety cut-out will prevent it. If hot you must
remove your battery pack from the charger and
let it cool first to ambient temperature. Then,
you can start the recharging. If you charge a
second battery pack immediately after the first
then the charger can be over-heated. Always
allow at least 15 minutes rest between battery
pack charging.
5. Reasons for different battery pack
working times.
Charging time problems, as above, and having
not used a battery pack for a prolonged time
will reduce the battery pack working time.
This can be corrected after several charge
and discharge cycles by charging & working
with your tool. Do not re-charge your battery
pack below 2º and above 35
performance.
as this will affect
o
25
A