Spot Cleaning Mode - ECOVACS ROBOTICS DEEBOT M88 Manuel D'instructions

3. Operating and Programming
2 Single Room Mode
This mode is used when DEEBOT only needs to
clean a single room with a maximum size of 30 m
(323 sq ft). To start Single Room Cleaning Mode,
press the Single Mode Button on the Remote
Control or on the App main screen.
* Single Room Cleaning Mode cleans using the set Cleaning Pattern. Random Cleaning Pattern
is best for carpet. Programmed Cleaning Pattern is best for bare floors.
* The room must be contained for Single Room Mode to function properly. Close doors to the
room entrance and exit to contain the room.
3

Spot Cleaning Mode

(2-5 minutes)
This mode is applicable for a small area of highly
concentrated dirt or dust. To start Spot Cleaning
Mode, press
Spot Cleaning Mode, DEEBOT focuses on a
specific area to clean. DEEBOT cleans the area
in a spiral pattern and returns to its starting point
when it completes cleaning.
* Spot Cleaning Mode can only be started
using the App.
14
EN
on the App main screen. In
2