Warning And Error Messages; Macro Protocol: Special Functions; Description; Special Functions Featured By Macro Protocol - EverFocus KS-KBK Manuel D'instructions

4.10 Warning a nd error messages
The keyboard will advise the operator of a requested operation failure by messages on the display. These
messages can be set up in four different ways:
• disabled messages: messages are not shown
• automatic message without warning beep: the message will be shown for about 3 seconds and will then
disappear automatically without the acoustic signal; it can be removed in advance by pressing
• automatic message with warning beep: the message will be shown for about 3 seconds and is accompanied
by a beep; it will disappear automatically and can be removed by pressing
• message with confirmation: the message is accompanied by a warning beep and only disappears when the
operator presses
4.11 Macro Pro tocol: special functions

4.11.1 Description

Macro Protocol on Video line can be set up to be used in particular systems. After choosing Macro protocol, with
cursor on the Protocol press
When one or more special functions are active the display reads
4.11.2 Special fun ctions featured by Macro protocol
4.11.2.1 Polling
Default: YES.
Communication between keyboard and matrix is based on polling techniques.
If the keyboard is connected to a personal computer or another OEM device the polling can be suspended to
ease the implementation of a Macro protocol and avoid the need to respect very strict timing requests.
4.11.2.2 Sanyo Mux
Default: NO.
Set to YES if the multiplexer Sanyo is connected to a matrix Aux line. When enabled a set of special screens
are available on the keyboard.
If the multiplexer is directly connected to the keyboard set to NO.
4.11.2.3 9999 Camera s
Default: NO.
Set to YES if the system is composed by a group of matrixes (instead of a single one) and allows to control up
to 9999 cameras.

.

to enter the Macro submenu.

Page 15

.
.
MNECKSKBK_0350

.