Signal position
1
1
1
48
Fig 39
Fig 40
1
Fig 41
A ps 2 3 0 A D VA N CE D Per s o n al S c o pe
SIGNAL TRACE POSITION
First press the ‚Move' key before pressing the
arrow keys in order to move the signal in the
direction of the arrows. Prolonged pressing
will make the X or Y- position change faster.
A black bar (1) indicates the relative position
of the signal in the window, see fig. 39 to 41.
Notes:
The Y-position cannot be shifted in 'hold'-
•
mode
A total of 256 samples are stored in
•
memory, but the X-size of the screen is
limited. By shifting the X-direction you can
display all stored samples.
At time base (> 10s/div), 2048 samples are
•
taken.
When the markers are turned off, the cursor
•
keys are set for changing the time base and
input sensitivity when no keys are pressed
during 10 seconds.
TM