Table des Matières
Publicité
Setup
30
Fig 21
A ps 2 3 0 A D VA N CE D Per s o n al S c o pe
Notes:
• The last screen is saved when the
automatic deactivation of the scope is
activated.
• The auto power-off timer is factory-set to
12min at first power-on or after a reset
• The deactivation timer is deactivated when
you are using a slow time base (<10s/div).
• If „Never" is selected the backlight will
remain always on if activated.
3. Keybeep:
3
As you use your APS230, you will hear a
beep with each key press.
You can turn this feature off by de-selecting
KEY BEEP.
4
Factory default setting is Key Beep ON.
4. PC link
Activates the serial interface.
Allows connection of the APS230 to a PC.
Use this setting with special software, check
our web site (www.velleman.be) for details.
TM
Publicité
Table des Matières
