Applications; Unpacking; Optional Accessories - Hitachi C 10RA2 Mode D'emploi

English

OPTIONAL ACCESSORIES

q Dado Insert (For dado cutter set) (Code No.314325) Convenient for dado cutting. Refer to parts list.
w Push Stick (Code No.314324) Convenient for ripping small pieces cutting. Refer to parts list.
e Table Saw Stand (Code No.314819) Convenient for setting the table saw. Refer to Fig. 12-c.
WARNING:
Using attachments or accessories not recommended in this manual can be dangerous
and cause personal injury or mechanical damage to the saw.

APPLICATIONS

Wood (hard or soft woods)

UNPACKING

The parts illustrated in Fig. 4 described are packaged together with the tool. When unpacking, carefully
confirm that all parts are accounted for.
1
1. Miter Gauge (1 piece)
2. Saw Blade Guard and Spreader Assembly (1 piece)
3. Elbow (1 piece)
4. Rip Fence (1 piece)
5. Hex. Wrench (1 piece)
6. Wrench (1 piece)
7. Handle Bar (1 piece)
10
...sold separately
2
15
13
14
3
5 6
10 9
7
12 11
Fig. 4
8. Grip (1 piece)
9. 6 × 90 mm Bolt (1 piece)
10. 6 × 110 mm Bolt (1 piece)
11. 6 mm Spring Washer (2 pieces)
12. 6 mm Flat Washer (2 pieces)
13. 8 × 20 mm Bolt (with / washers) (4 pieces)
14. Set Plate (4 pieces)
15. Cusion (1 piece)
4
8