Starting And Using - Dalla Corte mina Notice Pour L'utilisateur

46 |

Starting and using

NOTE
This heating sequence takes place only when the machine is
switched on after it has been switched off completely with the main
switch (1 Pic.2).
This sequence allows the machine to heat up without using too
much energy, thus avoiding possible overload troubles in the local
power system.
Follow the following instructions with the help of the scheme in
Pic.1.
• Turn on the water tap (1 Pic.1).
• Turn on the ON/OFF electric supply switch (7 Pic.1) and turn the
machine switch clockwise (1 Pic.2); make sure the power light
comes on.
• As soon as the machine has been turned on, the automatic auto-
fill function starts filling the boiler until the right level is reached;
during this stage, the
• Once the filling phase is over, the brewing group will start heating
up and the light will start blinking.
light comes on.