Siemens SINUMERIK 840D SL Manuel De Mise En Service page 1406

Configuration du système
2.3 Fichier de configuration "basesys.ini"
; the special value "ALL", all subsystems can be disabled
;DisableSubsystems=nck
; Directory for OEM netboot files (served by tftp to diskless clients)
NetbootDirectory=/oem/common/netboot
; Default security type for all CIFS mounts, if not given explicitly
; by sc connect -sec=TYPE. If not defined, NTLMv1 is used or NTLMv2
; if the server allows.
;DefaultCIFSSecurity=ntlmssp
; Properties of local time zone: names, offset, start and end day
; Some examples:
;
;
;
;
;
;
;
;
;
Timezone=UTC
; TimezoneName(for-into-only-do-not-change)=Etc/Universal
; If DisablePLCTimeSync is set, no time synchronization with
; PLC will happen
;DisablePLCTimeSync=1
; PLCTimeType informs time synchronization what kind of time
; is kept in PLC:
; local: PLC uses "wall clock time", with switches between DST and
;
;
;
38
Europe: WET0WEST,M3.5.0,M10.5.0
CET-1CEST,M3.5.0,M10.5.0
EET-2EEST,M3.5.0,M10.5.0
USA: EST5EDT,M4.1.0,M10.5.0
CST6CDT,M4.1.0,M10.5.0
MST7MDT,M4.1.0,M10.5.0
PST8PDT,M4.1.0,M10.5.0
China: CST-8
Japan: JST-9
standard time, if DST exists in the selected Timezone
If Linux synchronizes to an external server and passes time on
to PLC, this means the PLC clock is changed twice a year.
Manuel de mise en service, 12/2017, 6FC5397-1DP40-6DA1
Système d'exploitation NCU