Philips AVENT SCF358 Mode D'emploi page 9

Feed your baby the milk
Press the on / off button to switch off the appliance and take out the milk bottle.
Note
• If you are using a small bottle, such as a 2 oz bottle, be careful to avoid touching the hot
water when you remove the bottle.
Always check the temperature of the milk before you feed your baby. Gently swirl
the bottle and check by sprinkling a few drops on the inside of your wrist.
Reuse the bottle warmer right away for another bottle
If you want to warm another bottle, let the bottle warmer cool down for a few
minutes. To speed up, fill the bottle warmer with fresh cold water.
When you switch on the bottle warmer, the progress indicator flashes gradually to
indicate that the appliance is warming again.
Note
• If the progress indicator is on but not flashing, the bottle warmer is still too hot to warm
another bottle. Switch off the bottle warmer and let it cool down for a few minutes.
ENGLISH
9