Philips AVENT SCF358 Mode D'emploi page 7

Explanation of settings
Milk volume
Baby food warming
Keep warm / defrost
When the entire progress indicator is on but not flashing, the milk / food is ready
for feeding. Feed your baby when the milk / food is warmed. Do not rewarm the
milk / food after it has cooled down, as bacteria may start to develop in it.
Warm milk
1
Place the bottle in the bottle warmer. Fill with drinking water to the level of
the milk. If you have a large volume of milk, fill with water to approximately
1 cm below the top of the bottle warmer.
2
Select the desired setting based on the milk volume and press the on / off
button to switch on.
• Select the milk volume you want to warm. You
can set from 30 ml / 1 oz up to 330 ml / 11 oz.
The bottle warmer warms the milk to
approximately body temperature. It then
switches to keep warm mode automatically for
about 60 minutes.
• Select this setting to warm baby food.
• The built-in sensor detects the milk / baby
food temperature to find the optimal setting. If
the milk / baby food is warm, it will be warmed
gradually and kept at the right temperature.
If the milk / baby food is frozen, it will be
defrosted to liquid state and then warmed to
the right temperature.
7oz
210ml
7
210
ENGLISH
7