Philips AVENT SCF358 Mode D'emploi page 12

ENGLISH
12
Keep warm
With this setting, the built-in sensor detects the milk temperature to switch to the
optimal setting. If you put warm milk into the appliance, it is warmed gradually and
kept at the right temperature.
1
Place the bottle in the bottle warmer. Fill with drinking water to the level of
the milk. If you have a large volume of milk, fill with water to approximately
1 cm below the top of the bottle warmer.
2
Select the keep warm / defrost setting and press the on / off button to
switch on.
3
The progress indicator flashes to show that milk is warming.
4
When the entire progress indicator lights up continuously, the milk is ready
for feeding and the bottle warmer keeps the milk at this temperature.