Télécharger Imprimer la page

Philips AVENT SCF358 Mode D'emploi page 5

Masquer les pouces Voir aussi pour AVENT SCF358:

Publicité

Les langues disponibles

Les langues disponibles

- If the appliance is of the grounded type, the cord set or
extension cord should be a grounding-type 3-wire cord.
- Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts.
- The use of accessory attachments not recommended by
the appliance manufacturer may cause injuries.
- To disconnect, turn any control to "off", then remove plug
from wall outlet.
- Before serving be sure food is at safe temperature.
- Before serving, unplug cord form wall outlet and dish. Do
not leave cord within child's reach.
Caution
- This appliance is intended for use in household.
- The food should not be heated for too long.
- Always check the food temperature before you feed
your child. Gently swirl the bottle and check by sprinkling
a few drops on the inside of your wrist. (Follow the
instructions in section ''Feed your baby the milk'' . )
- Unplug the appliance when it is not in use.
- The surface of the heating element is subject to residual
heat after use.
- Let the appliance cool down before you clean it.
- Follow the descaling instructions to avoid irreparable
damage.
- Do not try to open or repair the appliance yourself.
Contact the Philips Consumer Care Center in your
country (see www.philips.com/support).
SAVE THESE INSTRUCTIONS
The production date code YYWW is located in the cord storage compartment in the
base of the bottle warmer.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
ENGLISH
5

Publicité

Dépannage

loading