Automatic Shutoff - Teuco SEASIDE T07 Manuel De L'utilisateur

SWITChING ON FROM ThE REMOTE CONTROL

AUTOMATIC ShUTOFF:

if no control panel or remote control button is pressed within 30 minutes following power-up or since the last function
was active (TimER setting) the system shuts off and the display reverts to STaND-By .
DiSiNFECTiON of the system is not carried out (see DiSiNFECTiON) .
SEASIDE
SEASIDE
To switch on, press the "0/i" button;
the welcome message will appear in the control panel display
for a few seconds .
Thereafter,
the display switches to REaDy;
the system can now be used
(see WaTERliGHT or BlOWER) .
To switch off the panel, press "0/i" a second time:
if no cycle has been selected, whether Waterlight or Blower,
the system shuts off and the display reverts to STaND-By .
if if at least one cycle has been selected, whether Waterlight
or Blower, a message will be displayed prompting
DiSiNFECTiON (see DiSiNFECTiON) .
EN
w e l C O M e t O
S e a S i D e
3 6 ° C
2 0 : 3 0
r e a D Y
Display indicating
READy status
2 0 : 3 0
Display in STAND-By mode
S t a r t
D i S i N F e C t i O N ?
Display showing
Disinfection prompt
11
11
IT