Bluetooth - SOUNDMASTER IR45SW Manuel D'instructions

Note - When it is playing FM radio, press the
you press the button, it will display various information at a time such as radio frequency and
big clock display.
Manual Tune
To manual tune to the frequency, long press the "OK" on
remote or long press "Dial/OK" on the unit, until you see
the "Tuning" appeared on the display, at the bottom right
corner. Use the ◄ / ► button on remote to tune the
frequency. When done, long press the "OK" button to exit
manual tune
Before transmission between your Bluetooth device and the radio is possible, both devices must
be coupled. This process is called "pairing". The unit is served as a receiver, to receive music
stream to play on the unit.
If you have already coupled to a Bluetooth device before, this connection will be restored
automatically when both devices are in range and Bluetooth operation has been selected on the
radio. "Pairing" does not have to be repeated. This function may need to be activated in your
Bluetooth device, however.
1. Push the "Menu" button to display the selection menu for the different operating modes.
2. Use the /
3. Switch your Bluetooth device to which you want to connect the radio on and activate the
pairing mode here. The device scans for Bluetooth devices in the reception range.
4. When the radio is found, your Bluetooth device shows its name IR45SW.
5. Select the radio at your Bluetooth device.
6. Start playback on your Bluetooth device.
Playback now takes place using the radio
1. Choose Alarm from the main menu or press the "Alarm" button on the remote control.
2. Select either Alarm 1 or Alarm 2, choose Turn on to activate the Alarm.
3. Follow the alarm wizard instructions to set the alarm.
4. The wizard will guide you through the settings below:
Time - Set the time for the alarm
Sound - You can choose Tone, Favourite, FM Radio or DAB Radio as the alarm
source.
Note - Wake to FM Radio or Wake to DAB Radio - only the preset stations can
Wake to My Favourite – Please preset your favorite station before setting this
as the alarm source.
Repeat -You can schedule the alarm as you desire —Everyday, Once or multiple days.
Alarm Volume - Adjust the volume of the alarm as you like by rotating the "Dial/OK"

BLUETOOTH

button to select the operating mode Bluetooth and push the dial switch.
be used for the radio alarm (if the preset scan has been completed).
knob or ▲ / ▼ button on remote.
button to view more radio information, each time
ALARM
9
IR45SW / English Instruction Manual