Arda HM-20100630 Guide D'utilisation page 6

Wall Mounted Hoods
Fixing the Decorative Chimney Duct
1. Carefully losen but do not separate the
telescopic chimney duct pieces.
f
2. Plug in the Hood.
3. adjust the width of the support bracket to match
the upper duct. Fix it to the ceiling using the screws
provided (D) so that it is centred in line with your
hood and at a distance from the ceiling indicated.
e
4. attach the inside decorative chimney duct to the
support bracket using provided screws (F).
5. Slide the outer chimney duct down over the
exhaust piece.
- 5 -