Important Safety Information - Arda HM-20100630 Guide D'utilisation

1. IMPORTANT SAFETY INFORMATION

* Important: Read the complete manual carefully before installation*
WaRnInGS:
TO REDUCE THE RISK OF FIRE, ELECTRICaL SHOCK OR PERSOnaL InJURY,
PLEaSE OBSERVE THE FOLLOWInG:
1. InSTaLLaTIOn anD ELECTRICaL WORK MUST BE DOnE BY a qUaLIFIED
TECHnICIan In aCCORDanCE WITH aLL aPPLICaBLE CODES anD
STanDaRDS.
2. IF THE SUPPLY CORD IS DaMaGED, IT MUST BE REPLaCED BY THE
ManUFaCTURER, ITS SERVICE aGEnT OR a SIMILaRLY qUaLIFIED PERSOn
TO aVOID a HazaRD. anY MODIFICaTIOnS THaT MaY BE REqUIRED TO
THE ELECTRICaL SYSTEM FOR THE InSTaLLaTIOn OF THE RanGE HOOD
MUST OnLY BE MaDE BY qUaLIFIED ELECTRICIanS.
3. BEFORE SERVICInG OR CLEanInG UnIT, SWITCH POWER OFF aT THE
SERVICE PanEL. LOCK PanEL TO PREVEnT POWER FROM BEInG SWITCHED
On aCCIDEnTaLLY.
4. USE THIS UnIT OnLY In THE MannER InTEnDED BY THE
ManUFaCTURER.
5. SUFFICIEnT aIR IS nEEDED FOR COMBUSTIOn anD ExHaUSTInG
OF GaSES THROUGH THE CHIMnEY OF FUEL BURnInG EqUIPMEnT
TO PREVEnT BaCK DRaFTInG. FOLLOW THE HEaTInG EqUIPMEnT
ManUFaCTURER'S GUIDELInES anD SaFETY STanDaRDS SUCH aS
THOSE PUBLISHED BY THE naTIOnaL FIRE PROTECTIOn aSSOCIaTIOn
(nFPa), anD THE aMERICan SOCIETY FOR HEaTInG, REFRIGERaTIOn
anD aIR COnDITIOnInG EnGInEERS (aSHRaE), anD THE LOCaL CODE
aUTHORITIES.
6. WHEn CUTTInG OR DRILLInG InTO WaLL OR CEILInG, BE CaREFUL
nOT TO DaMaGE ExSISTInG ELECTRICaL WIRInG anD OTHER HIDDEn
UTILITIES.
7. DUCTED FanS MUST aLWaYS BE VEnTED TO THE OUTDOORS.
8. TO REDUCE THE RISK OF FIRE, USE OnLY METaL DUCTWORK.
9. THIS UnIT MUST BE GROUnDED.
- 2 -
Intended for Domestic Kitchen Use Only