Changing The Light Bulbs - Arda HM-20100630 Guide D'utilisation

Control Functions
lighting:
WARNING: Do not touch or change light bulbs while the hood is operating. Wait until
the bulb has cooled before removing.
Depending on your model of aRDa hood, there are three possible types of lighting.
Incandescent , halogen and LED. The illumination is designed for use during cooking and
not for prolonged general illumination of your kitchen. Prolonged use of the lights may
reduce the life time of the bulbs.

Changing the light Bulbs

Use only the same lamps as the original specification. Replacement lights are available
through www.ardaappliances.com
Incandescent lights
Unscrew the light. Be careful as the glass may break. Replace with the same size and
wattage.
Halogen and lED lights
With the grease filter removed, press the light fixture out of its mounting bracket.
Unplug the light from the wiring harness. avoid direct contact between the lense and
your hands. Replace the damaged lamp by reversing the steps. Snap in place
- 11 -