Troubleshooting Guide - Arda HM-20100630 Guide D'utilisation

6. TrOUbLE SHOOTiNg gUiDE
Problem
Hood doesn't turn on.
Poor airflow
Hood is vibrating
Motor running but no air flow
Motor stops after a few
minutes
Strong cooking smell.
Oil dripping onto stove.
Whirring sound
Fan does not work
Lights do not work
- 12 -
Possible Reason
no electrical supply.
Power cord is damaged
aluminum grease filters
clogged
Charcoal filters clogged.
Re-circulating mode only.
Hood is not secured in place
Butterfly valve jammed.
High temperature safety
device activated.
The hood is installed too near
the cooking surface.
Fan speed too low
Charcoal filters not installed.
aluminum grease filter
saturated.
Something in contact with fan
blade.
Ensure the plug is connected.
Ensure the main switch is
turned On.
Call aRDa service
Clean the filters and replace
Replace the charcoal filters.
Check the installation of hood.
Tighten mounting screws.
Call aRDa service
The kitchen is not sufficiently
ventilated.
The hood must be at least
61cm (24" ) from the stove.
Use one of the higher settings.
In re-circulating mode,
charcoal filters must be
Wash the aluminum grease
Call aRDa service
Call aRDa service
Call aRDa service
Visit us @ www.ardaappliances. com
solution
when dry.
installed.
filters