Table Des Matières - Elcometer 510 S Guide D'utilisation

CONTENTS
Section
1 Gauge Overview
2 Box Contents
3 Using the Gauge
4 Getting Started
5 Securing the Dolly
6 Attaching the Gauge to the Dolly
7 Performing the Test
8 Assessing the Results
9 Batching
10 Reviewing Batch Data
11 Verifying the Gauge Calibration
12 Menu Structure
13 Downloading Data
14 Upgrading Your Gauge
15 Spares & Accessories
16 Adhesives
17 Warranty Statement
18 Technical Specification
19 Legal Notices & Regulatory Information
Hg
Pb
For the avoidance of doubt, please refer to the original English language version.
Gauge Dimensions:
Gauge Weight:
Note: Compliance can only be assured if approved accessories are used with this product.
© Elcometer Limited 2014 - 2022. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
en-1
R
260 x 100 x 66mm (10.3 x 3.9 x 2.6")
With 10mm, 14.2mm & 20mm Standard Dolly Skirt: 2.9kgs (6.4lbs);
With 50mm Standard Dolly Skirt: 3.1kgs (8.3lbs)
Page
en-2
en-3
en-4
en-4
en-8
en-9
en-10
en-11
en-13
en-14
en-15
en-17
en-18
en-18
en-18
en-20
en-21
en-21
en-23
www.elcometer.com