Replacing The Battery; Cleaning And Care; Troubleshooting - SilverCrest SNAW 1000 C1 Mode D'emploi

6) Enter the food in the appropriate fi eld in the food tables of these operating
instructions.
NOTICE
► You can also overwrite one of your previously saved codes, in that you simply
reassign the code number and save the new nutritional values under this code.

Replacing the battery

1) Open the battery compartment 2, remove the old battery and dispose of it
in an environmentally correct way.
2) Insert a new button cell battery of type CR2032 3 V in accordance with the
polarity specifi ed in the battery compartment.
3) Close the battery compartment 2. The battery compartment cover must
engage audibly.

Cleaning and Care

IMPORTANT
Ensure that no fl uids can enter the scale!
This could irreparably damage the appliance.
Do not use abrasive or solvent cleaners.
These could damage the surfaces.
■ Wipe the scale with a soft cloth moistened with mild soap suds.
Clean the display 3 only with a lightly moistened cloth and then wipe it dry
■
with a lint-free towel.
To clean the weighing plate 1 carefully remove it, in that you pull it straight
■
up. Clean the weighing plate 1 in a mild soapy solution . Dry the weighing
plate 1 well before putting it back on the scale and fi rmly pressing it down.

Troubleshooting

In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid danger and damage.
WARNING
Observe the following safety information to avoid danger and property damage:
► Repairs to electronic appliances may only be carried out by specialists
who have been trained by the manufacturer. Considerable danger to the
consumer and damage to the appliance can occur as a result of incorrect
repairs.
SNAW 1000 C1
GB
87