JVC KW-ADV792 Manuel D'instructions page 27

Menu item
Open Preparation:
• Operate the Bluetooth device to turn on its Bluetooth function.
• Make sure "NEW DEVICE" is selected. If not, press [
1
2
3
Now connection is established and you can use the device through the unit.
• The device remains registered even after you disconnect the device. Use <Connect> or
Search Preparation:
• Make sure "NEW DEVICE" is selected. If not, press [
1
2
3
4
Now connection is established and you can use the device through the unit.
* 3
Some devices have their own PIN code. Enter the specified PIN code to the unit.
Press <Open> on the <Bluetooth> menu.
Enter a PIN (Personal Identification Number) *
• You can enter any number you like (1-digit to 16-digit number).
PIN Code
Back Back
Operate the Bluetooth device to connect while "Open..." is displayed on the screen.
Enter the same PIN code (as entered in the above step) on the device to be connected.
activate <Auto Connect> to connect the same device the next time.
Press <Search> on the <Bluetooth> menu.
The unit searches for available devices and displays the list of them. (If no available
device is detected, "Device Unfound" appears.)
Select a device you want to connect.
Enter the specific PIN code of the device to the unit.
• Refer to the instructions supplied with the device to check the PIN code.
Operate the Bluetooth device to connect while "Connecting..." is displayed on the
screen.
Selectable setting/item
5
] or [
3
.
You can enter [0] – [9] only.
[BS]
[Del]
[Enter] : Confirms the entry.
5
] or [
∞
] to select it.
: Erases the character
before the cursor.
: Erases the character on
the cursor.
∞
] to select it.
Continued on the next page
AV MENU 27