Kalorik MAXX Mode D'emploi page 27

"WARRANTY" section to get a replacement bulb. Be sure to perform the
following steps carefully as they comprise of manipulating small glass parts.
1. Unplug the appliance from the outlet and allow it to cool completely
to avoid electric shocks or burns.
2. With a screwdriver, unscrew the screw holding the metal clamp against
the glass cover.
3. Using a tool such as a flat-ended screwdriver, carefully remove the
glass to gain access to the lightbulb.
4. Remove the lamp by shifting it upwards and ejecting the bi-pin end
from its place. To replace with new bulb, align the two pins with the
small holes in the original bulb base and plug back in, ensuring the
new lamp is securely in place.
5. Place the glass cover back into a secure position, ensuring it fits neatly,
and screw the metal clamp back into its original position to prevent
glass cover from falling off.
DO NOT IMMERSE THE OVEN IN WATER OR ANY OTHER LIQUID.
ANY OTHER SERVICING SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE
REPRESENTATIVE.
www.KALORIK.com
27
AFO 46045 – 200723C