Kalorik MAXX Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tips
When setting up the Maxx Air fryer oven, always make sure the sliding
crumb tray is inserted prior to starting your cooking process. Rinse and
clean the sliding crumb tray after every use.
When cooking foods that may drip crumbs or grease during the
cooking process, make sure to place the baking/drip pan on the
lowest slot. This will help maintain the unit as clean as possible and
protect the lower heating elements.
Using the Rotisserie Spit
Insert the rotisserie spit through the center of the food lengthwise.
Slide the forks onto each side of the spit and secure them in place by
tightening the screws provided. Make sure the forks are securely
inserted and food is centered on the spit.
Use the rotisserie handle to lift the rotisserie rod. The hooks of the
rotisserie handle should be placed under the grooves on both sides of
the rod. Make sure the long end of the rod is on the right side of the
handle, and the short-indented side is on the left side of the handle.
Open the oven doors. Slide the accessory in the cavity. Insert the right
side (long end) of the rod in the rotisserie spit support. Then, place the
left side (short indented end of the rod) on the left hook inside the
cavity.
CAUTION: Rotisserie accessories are very sharp and will likely get very hot
during the cooking process. Be careful and use oven mitts to avoid
personal injury.
WARNING: Place all ingredients on the racks, rotisserie spit or basket in a
way to prevent any contact with the appliance's heating elements. Do not
overfill.
www.KALORIK.com
chicken breasts, corn dogs, ...), then place on
2
(BAKE 2) level.
nd
When using the oven function, we recommend
rotating your pan 180° halfway through the
cooking time to ensure even results.
14
AFO 46045 – 200723C

Publicité

Table des Matières
loading

Table des Matières