Servicing And Maintenance; Draining The Condensation Water - TechniSat TECHNIPOLAR 1 Mode D'emploi

9 Servicing and maintenance

9.1 Draining the condensation water

Over time, condensation will collect in the air conditioning unit's tank. If the tank is
full, the unit stops and Ft (= full tank) appears on the display.
Draining the condensation water manually:
> Remove the plug of the air conditioning unit from the wall socket.
> Place a suitable container under the lower condensate drain (9, page 8).
> Remove the drain cap and let all the water drain into the collection vessel.
> When the water has drained, put the cap back on the condensate drain.
> You can then put the air conditioner back into operation.
Automatically drain the condensed water continuously:
In dehumidifier mode, the condensed water must be continuously drained to the
outside. The upper condensate drain (10, page 8) is provided for this purpose.
> Remove the plug of the air conditioning unit from the wall socket.
> Place a suitable container under the upper condensate drain (10, page 8).
> Remove the drain cap and attach a suitable hose to the drain connection.
> The hose should now be directed straight down into the collection vessel. Be
careful not to kink the hose.
> Put the air conditioner back into operation and activate the dehumidifier
mode.
In cool mode, the upper condensate drain must be closed to ensure efficient
operation.
DE
EN
FR
IT
NL
PL
47