Safety Instructions; Signs And Symbols Used - TechniSat TECHNIPOLAR 1 Mode D'emploi

3 Safety instructions

3.1 Signs and symbols used

In this instruction manual:
Indicates a safety instruction which can lead to serious injuries or death if not
observed. Note the following signal words:
DANGER - Serious / fatal injury
WARNING - Serious injury, possibly fatal
CAUTION - Injury
This identifies information that must always be observed to prevent defects,
data loss/misuse and undesired operation. It also describes other functions
of your unit.
Beware of electrical voltage. Follow all safety instructions to avoid electric
shock. Do not open the unit under any circumstances.
On the unit:
Danger from hazardous substances. Follow all safety instructions.
Carelessness in proximity to flammable substances can lead to fire.
Observe all information and safety instructions in the instruction manual.
Indoor use - devices with this symbol are only suitable for indoor use.
Protection class II - Electrical devices in protection class II are electrical
devices with continuous double and/or reinforced insulation and having no
connection options for a protective conductor. The casing of an electrical
device of protection class II, which is enclosed in an insulating material, can
form part or all of the additional or reinforced insulation.
Your device bears the CE symbol and complies with all requisite EU
standards.
Electronic devices do not belong in the household waste and must be
disposed of properly in accordance with Directive 2002/96/EC of the
European Parliament and of the Council dated January 27, 2003 concerning
waste electrical and electronic equipment. Please return this unit to the
designated public collection point for disposal at the end of its service life.
32