Installing The Window Kit - TechniSat TECHNIPOLAR 1 Mode D'emploi

5.2 Installing the window kit

The window kit is designed to seal tilt windows. To install proceed as follows:
Glue the Velcro tape to the
window frame.
Shorten the Velcro tape at
the corners.
Attach the window seal.
Open the zipper at the side.
38
Glue the Velcro tape to the
frame of the window.
Make sure that the corners
are flush.
Make sure that both halves
are aligned with each other.
Insert the exhaust hose into the
opening and close the zipper.