Activating Special Functions With The Remote Control; Ventilation Outlet; Changing The Temperature Unit; Night Mode - TechniSat TECHNIPOLAR 1 Mode D'emploi

> Point the remote control at the top of the air conditioner. Observe the
maximum distance of 7 metres.

8.3 Activating special functions with the remote control

8.3.1 Ventilation outlet

The upper ventilation outlet opens and closes slightly in a constant rhythm. If you
want to lock the ventilation outlet in one position, press the Air outlet button on the
remote control.
Press the button again to automatically adjust the panning.

8.3.2 Changing the temperature unit

Press the Temperature unit button to switch the temperature unit shown on the
display between degrees Celsius and Fahrenheit.

8.3.3 Night mode

In night mode, the display and the LED on the top of the unit are dimmed.
> Select heat, cool or automatic mode.
> Press the Night mode button on your remote control.
The displays are now dimmed and the fan runs at the lowest speed.
In cool mode, the temperature setting is gradually increased to 1 °C above
the original target temperature for each of the first 2 hours. The unit then
maintains the same temperature for 6 hours and then switches to standby
mode.
In heat mode, the temperature setting is gradually lowered to 1 °C below
the original target temperature for each of the first 3 hours. The unit then
maintains the same temperature for 5 hours and then switches to standby
mode.
46