Site Of Installation - TechniSat TECHNIPOLAR 1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56

5.3 Site of installation

>
The unit should be set up on a solid surface to minimise noise and vibration.
To ensure a stable and secure state, place the unit on a smooth, level floor
that is solid enough to support the weight of the unit.
>
The unit is equipped with wheels to make installation easier. However, it
should only be wheeled on smooth, flat surfaces. Be careful when wheeling
it on carpets. Be careful and protect the floors when you roll the unit over
wooden floors. Do not try to roll the unit over objects.
>
The unit must be installed within the reach of a properly dimensioned
earthed wall outlet.
>
Never place any obstacles around the air inlet or outlet vents on the unit.
>
Leave a distance of at least 45 cm from the wall to achieve efficient air
conditioning.
>
The hose can be extended, but should be kept as short as possible. Also
make sure that the hose has no kinks and does not sag.
DE
EN
FR
IT
NL
PL
39

Publicité

Table des Matières
loading

Table des Matières