Bosch CTL636E.1 Mode D'emploi page 47

Rinsing the milk system
■ Touch E.
■ Touch [ Rinse milk system ] to select the
programme.
■ Open door and remove suction pipe from
the milk tube.
■ Wipe the suction pipe and insert the end
of the suction pipe into the hole on the
coffee grounds container.
■ Close the door. Be careful not to jam the
milk tube.
■ Place an empty glass underneath the
beverage outlet.
■ Press C.
The milk system is rinsed with water.
■ Then empty the glass.
■ Touch E to exit the programme.
Cleaning the milk system manually
Take the milk system apart to clean it:
■ Push the beverage outlet down com­
pletely and pull the cover forward to
remove.
■ Press the snap lever to the left of the
beverage outlet downwards and pull the
beverage outlet forward.
Care and daily cleaning
■ Remove the milk tube. Dismantle the top
and bottom sections of the beverage outlet.
■ Separate the milk tubes, connecting
element and suction pipe.
■ Clean the individual parts with a deter­
gent solution and a soft cloth.
■ Rinse all parts with clean water and dry
them.
■ Put the individual parts back together
again (see also the quick reference guide).
■ Attach the beverage outlet directly from
the front firmly to the three connections.
■ Replace the cover.
en
43