Schedule Function - Duux Edge Manuel Utilisateur

decrease button and choose the number
Y
corresponding with the desired amount of
hours after which the product automatically
turns on - 1 to 24.
- Wait for 3 seconds.
- The set time and the timer icon
flashing and lights up for 2 seconds, showing
that the chosen value is confirmed.
- The product returns to standby mode.
- The timer icon lights up on the display to
indicate that the timer function is activated.
7.4.2. Deactivating the turn on timer
NOTICE
• The product must be in standby mode to
deactivate the turn on timer function.
1. Press and hold the timer button
seconds.
- The product makes a beep sound.
- The timer icon is not shown on the display
anymore to indicate that the timer function is
deactivated.
7.4.3. Setting the turn off timer
NOTICE
• The product must be in awake mode to activate
this function.
1. Press the timer button
- The product makes a beep sound.
- Number "0" starts flashing on the display
along with the timer icon
stop
for 3
A
.
A
.
2. Press the increase button
decrease button
Y
corresponding with the desired amount of
hours after which the product automatically
turns off - 1 to 24.
- Wait for 3 seconds.
- The set time and the timer icon
flashing and lights up for 2 seconds, showing
that the chosen value is confirmed.
- The product returns to awake mode.
- The timer icon lights up on the display to
indicate that the timer function is activated.
7.4.4. Deactivating the turn off timer
NOTICE
• The product must be in awake mode to deactivate
the turn off timer function.
1. Press and hold the timer button
seconds.
- The product makes a beep sound.
- The timer icon is not shown on the display
anymore to indicate that the timer function is
deactivated.

7.5. Schedule function

7.5.1. Preset schedules
NOTICE
• The timer function cannot be combined with the
schedule function.
The preset schedules are divided into settings
or the
T
and choose the number
stop
for 3
A
21