Duux Edge Manuel Utilisateur page 16

NOTICE
• Make sure that the plug is up to the sealing ring
into the hole.
4. Align the holes in the horizontal mounting
bracket with the holes in the wall.
e
5. Attach the horizontal mounting bracket
to the wall with the screws
e
screwdriver.
6. Align the hole in the vertical mounting
bracket with the holes in the horizontal
w
mounting bracket
16
using a
t
.
e
7. Attach the vertical mounting bracket
the horizontal bracket
using a screwdriver.
8. Place the mounting slots
mounting hooks of the horizontal mounting
bracket .
e
- A click is heard when the mounting bracket
hooks are in the mounting slots
9. Shift the product over the mounting bracket
hooks to the left until a stop is felt.
10. Shift the product downwards until a click is
heard.
- The product fixates itself onto the horizontal
mounting bracket
e
NOTICE
• The product is mounted correctly if you hear a
click sound.
to
w
with a screw
e y
over the
4
.
4
.