Gas Connections - Brandt TI213BS1 Guide D'utilisation

99625701_ML_B.qxd 19/11/04
G
as connections
Preliminary remarks
If the hob is to be installed above an
oven or if other nearby heating
appliances risk heating and damaging
the gas hose then it is essential that
a rigid pipe be installed instead.
If a flexible hose is used (in the case
of butane gas) then it must not be
installed in a place where it may be in
contact with a moving part of the kit-
chen unit or a place likely to get clut-
tered.
Access to the whole length of the connection hose must be possible and the gas
hose must be replaced before its use before date (indicated on the hose).
Whatever means of connections is chosen, make sure that it is gas sound after ins-
tallation by using soapy-water.
09:02 Page 43
Installing your hob in all simplicity
fig.A
Reinforced, braided,
flexible gas hose with
threaded connectors
fig.B
Flexible gas hose with
threaded connectors
43