Hach APA 6000 Mode D'emploi page 9

Figure 5 Tool kit
1 Tubing cutter, for Tefzel 0.030 ID x
0.062 OD tubing
2 Flangeless nut extender
3 Wrench, ¼-in., for the rotary valve
7
4 Wrench, allen, / -in.
64
5 Alignment tool for the pump module
6 Ferrule, for 0.062-in. OD tubing (4x)
7 Hex nut, 10-32, for 0.062-in. OD
tubing (4x)
8 Ferrule with locking ring, for 0.062-
in. OD tubing (10x)
9 Flangeless nut, ¼-28, for 0.062-in.
OD tubing (10x)
10 Flangeless nut, plug, ¼-28
11 Fitting, union, Tefzel, ¼-in. (4x)
12 Tubing, Tefzel, 0.030 ID x
0.062 OD, 4.6 m (15 ft)
Figure 6 Installation kit
1 Grab sample kit
2 Tubing, polyethylene, 0.25-in. OD
x .040-in. ID, 6m (20 ft)
Figure 7 Maintenance kit
1 Valve rotors (4x)
2 Pump piston seals, flanged,
0.722 OD x 0.104 long (8x)
3 Ceramic filters, 0.5 µm (4x)
3 Pump O-rings, fluorocarbon,
0.676 ID x 0.070 wide (4x)
4 High temperature, non-flammable
grease
English 9