JVC D-ILA DLA-G20U Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Operations (Cont.)
Projector button
STAND BY
LAMP
TEMP
EMERGENCY
VIDEO
COMPUTER
SETTING button
SETTING
+
3
QUICK
ALIGN
-
2
Remote control unit
OPERATE
COMPUTER VIDEO
T
VOL.
ZOOM
FOCUS
W
MENU/ENTER
PAGE
BACK
PRESET
QUICK
AV
ALIGN.
MUTING
PRESET button
30
Note
• To change the menu language displayed
English is set when the projector is shipped from the factory. The language
displayed can be selected from the following six languages:
ITALIANO (Italian), and FRANÇAIS (French). However, some displays such
as "Channel", "User Source Setup", "Display Size" and "Quick Alignment"
are shown only in English. Proper nouns such as line and source displays
are similarly treated.
MENU/ENTER button
Notes
• This button works only for numeric values. It does not work for switching
between ON and OFF.
• For items such as PIXEL CLOCK (TRACKING and PHASE), POSITION (H.
POS. and V. POS.), SOUND (TREBLE and BASS), both settings are reset
at the same time.
To display the SETTING menu
The setting menu is used to make basic adjustments and settings
(TRACKING, PHASE, H. POS., V. POS., FOCUS, ZOOM and
AUDIO-VOL.) of the video picture being projected after installation
(connection) or after inputs are switched. For operating the setting
menu, refer to "Making Basic Settings" on page 32.
• Press the projector's SETTING button.
The setting menu is displayed on the screen.
Projector
SETTING
To display the MAIN menu
The main menu is used to adjust or set the projected video picture
and the projector's condition, etc. (PIXEL CLOCK, POSITION,
PICTURE, SOUND, OPTIONS, SOURCE, CHANNEL, USER
SOURCE SETUP, DISPLAY SIZE, DECODER and LANGUAGE).
For operating the main menu, refer to pages 35 to 59.
• Press the remote control's MENU/ENTER button.
The main menu appears on the screen.
Remote control unit
MENU/ENTER
(Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish),
To use the remote control's PRESET button
The PRESET button is used for adjustments made on the main
menu or setting menu.
• When resetting only the selected settings to the factory-set
values, press the remote control's PRESET button.
Only the selected item's setting is reset to the factory-set value.
Remote control unit
PRESET

Publicité

Chapitres

Table des Matières
loading

Table des Matières