Connecting To Video Devices; Connecting To Hi-Vision Devices - JVC D-ILA DLA-G20U Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting to Various Devices (Cont.)

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.
• Read the manual which comes with each video device thoroughly.
• Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied.
To Y/C
Y/C
VIDEO
AUDIO
L
Y
Y
R
P
/B-Y
B
V
P
/R-Y
R
AUDIO OUT
REMOTE
To select the proper audio input for video input
The video input terminal (AV IN input terminal) can
be switched with the VIDEO button. However, since
this projector has only a single audio input terminal,
reconnect audio input in accordance with the AV
device to be used.

Connecting to Hi-Vision Devices

Before connection, be sure to turn off both the projector and Hi-Vision devices.
• Read the manual which comes with each Hi-Vision device thoroughly.
• Use separately available BNC cables and audio cables to connect Hi-Vision devices.
Y/C
VIDEO
AUDIO
L
R
V
AUDIO OUT
REMOTE
RS-232C
To select the proper audio input for video input
The video input terminal (AV IN input terminal) can
be switched with the VIDEO button. However, since
this projector has only a single audio input terminal,
reconnect audio input in accordance with the AV
device to be used.
20
S video cable
(separately available)
BNC-RCA conversion plug (accessory)
To VIDEO
To AUDIO (L)
AV connection
To AUDIO (R)
cable
(accessory)
To AUDIO (R)
To AUDIO (L)
Audio cable
(separately available)
To VIDEO
To Y
Y
Y
To P
B
P
/B-Y
B
To P
R
P
/R-Y
R
BNC cable (separately available)
Video devices
• VCR (Video Cassette recorder)
• Laser video disc player
• Camcorder
Memo
• When connecting a video device, use a TBC along with it, or one
which has a built-in TBC.
• Use of an extension cable to connect a video device and the
projector could cause video degradation.
• When a signal with much jitter is reproduced on a VCR or special-
effect playback is performed, the upper part of the picture or the
picture itself may be erased or distorted.
Hi-Vision devices
• W-VHS VCR
• Text/video camera
/B-Y
/R-Y
• Hi-Vision video camera
Memo
• Other devices with component signal output terminals (DVD player
(NTSC), etc.) can be connected. (*DVD: Digital Video Disc)
• DTV-format signals (480i, 480p,720p,1080i) can be input. For DTV-
format signals that can be handled, refer to page 69.

Publicité

Chapitres

Table des Matières
loading

Table des Matières