Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
5.B.c
Every 6 months:
Every 6 months a maintenance should be performed to ensure proper function of the machine, perform the following procedure
to do it:
5.A SAFETY INSTRUCTIONS (page 19)
5.C REMOVING THE DISTRIBUTOR HEAD (page 20)
5.D LUBRICATING THE DISTRIBUTOR HEAD (page 21)
5.F OPENING THE SIDE PANEL (page 22)
5.G LUBRICATING THE HORIZONTAL COLUMNS (page 22)
5.H TESTING THE SAFETIES OF THE MACHINE (page 23)
5.C
REMOVING THE DISTRIBUTOR HEAD
Periodically, remove the distributor head to clean and lubricate it. First, remove the strip of wedges. To do so, follow this
procedure :
Allen key N.2 & N.5
To load the machine,
rotate
the
loading
button in the load
position.
The wedge pusher
will move back to
allow
you
to
introduce
the
cartridge.
With
the
2.5mm
Allen Key, unscrew
the
locking
screw
half a turn.
Remove
cartridge.
Figure 5-2
Pull
out
distributor head of
the machine.
Figure 5-4
the
the
CS200 CART
Figure 5-3
Figure 5-5
20
Publicité
Table des Matières
