Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
3.G
MEANS OF JOINING
Thanks to the color code, you can recognize and select easily the type of Vnails to be
used. Please note that hard wood Vnails will have a yellow pusher to help identifying
them. A white pusher will indicate soft wood Vnails.
See color chart bellow for identification.
Cassese wedges can also be supplied in MDF type dedicated to MDF or very hard wood
use. They are identified by a red pusher in the cartridge.Please contact your local agent
to try them.
It is recommended to use the proper type of wedges for joining, always using hard wood wedges in
all your frame will result in poor tightening of the corner when the wood is soft. A first approach
consists in trying to scratch the wood with your nails, if you can scratch it easily, then a soft wood
wedge should do the job perfectly and you will get the best tightening.
3.H
LOADING OF THE WEDGES
To load the machine,
rotate
the
loading
button in the ON
position.
The wedge pusher
will move back to
allow
you
to
introduce
the
cartridge.
Load the cartridge
and turn back the
loading button to off.
Figure 3-21
CS200 CART
Figure 3-20
Figure 3-22
15
Publicité
Table des Matières
