Canarm AgSystems PRF36 Mode D'emploi

WARNING:
ALL WIRING SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN FOLLOWING LOCAL CODES
READ INSTRUCTIONS COMPLETELY BEFORE INSTALLATION & SAVE FOR REFERENCE
AND REGULATIONS.
Congratulations on the purchase of this versatile, new
circulating fan.
MAINTENANCE
It mounts to walls, posts or ceilings
any direction with the twist of a knob (no tools required!)
!
WARNING:
(DIAGRAM 1).
MOTORS ARE EQUIPPED WITH AUTOMATIC OVERLOAD PROTECTION AND MAY RESTART WITHOUT
This fan provides 12,000 CFM of circulating air flow - good
WARNING. ALWAYS DISCONNECT FROM POWER BEFORE ATTEMPTING TO SERVICE.
for any application.
Moving parts,
disconnect power
before servicing.
MOUNTING THE FAN
Your PRF36 comes with a swivel mount (shown in DIAGRAM 2), and
These fans are used in a variety of applications and therefore maintenance schedules will vary. In general no more than 1/16" of dirt
should be U-bolted to a post or bolted directly to the ceiling or
build-up should occur on blade, motor and guard for proper fan operation and to prevent premature failure. Particular care should be
ceiling joist. Holes are provided for U-bolts fitting 6X6, 4X4 & 3.5"
taken to clean fan blades front and back, and guards for better air moving performance. The motor should be kept clean to prevent
round posts.
overheating and premature failure. As with all mechanical equipment scheduled inspections should include checking that all hardware
is secure and blade set screws are tight. We suggest as a minimum, that this be performed at the start and twice more every season.
WARNING:
THE FAN MUST BE MOUNTED TO THE BUILDING
WARNING:
STRUCTURE.
THE STRUCTURE MUST BE SUITABLE TO
DO NOT PRESSURE WASH THE MOTOR. THE MOTOR IS TOTALLY ENCLOSED, BUT IT IS NOT
SUPPORT THE WEIGHT OF THE FAN.
SEALED.
WARNING:
WARNING:
THE HARDWARE FOR MOUNTING TO JOIST OR
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
BEAM IS NOT SUPPLIED. HARDWARE USED MUST
FOLLOWING:
BE SUITABLE FOR THE TYPE OF JOIST OR BEAM
A) Use this unit only in the manner intended by the manufacturer. If you have questions, contact
TO WHICH THE FAN WILL BE MOUNTED.
the manufacturer.
HARDWARE MUST CORRECTLY FIT THE MOUNTING
HOLES PROVIDED AND SUPPORT THE WEIGHT OF
B) Before servicing or cleaning unit, switch power off at service panel and lock the service
THE FAN.
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as a
Canarm Ltd. warrants every new fan to be free of defects and workmanship, to the extent that, within one year
tag to the service panel.
WARNING:
from the date of purchase, Canarm Ltd. shall either repair or replace at Canarm's option, any unit or part
thereof, returned freight pre-paid, and found to be defective. Proof of purchase may be required.
FAILURE TO TIGHTEN ALL BOLTS & NUTS
This warranty does not include any labor or transportation cost incidental to the removal and re-installation of
SECURELY COULD RESULT IN SERIOUS INJURY!
the unit at the users premises.
Components repaired or replaced are warranted through the remainder of the original warranty period only.
This warranty applies to the original purchaser - user only; it is null and void in case of alteration, accident,
abuse, neglect, and operation not in accordance with instructions.
USE & CARE
Fan Controls:
NOTICE: No warranty claims will be honored by Canarm Ltd. unless prior authorization is obtained.
WARNING:
Installation or Product problems? Do not return to store of purchase.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID
Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)
STATE SPEED CONTROL DEVICE.
1-800-567-2513 (EN FRANCAIS) Monday to Friday 8:00 - 5:00pm e.s.t.
PRF36-M - 03/27/08
PRF36-M - 03/27/08
PRF36-M - 03/27/08
PRF36 Fans
PRF36 Fans
and can be pointed in
Instruction Manua
READ AND SAVE THESE INSTRUCTIONS
CANARM LTD.
2157 PARKEDALE AVENUE
BROCKVILLE, ONTARIO K6V 5V6
or visit www.canarm.com
TELEPHONE: (613) 342-5424
FAX: 1-800-263-4598
E-MAIL: agsales@canarm.ca
DIAGRAM 1
DIAGRAM 2
Multiple
holes
allowing
several
directional
adjustments
WARRANTY
Nylon locking
nut prevents
loosening
CANARM LTEE.
2555 RUE BERNARD LEFEBVRE
LAVAL, QUEBEC H7C 0A5
TELEPHONE: (450) 665-2535
FAX: (450) 665-0910
E-MAIL: agsales@canarm.ca
Mounts to wall, post or ceiling!
l
Knob allows simple directional adjustments
(no tools required!)
SWIVEL MOUNT
TOP (For post/wall mount)
Inside holes could be used for ceiling mount
Slot allows angular
adjustment
BOTTOM (For post/wall mount)
ARTHUR MANUFACTURING FACILITY
#7686 CONCESSION 16, RR4
ARTHUR, ONTARIO N0G 1A0
TELEPHONE: (519) 848-3910
FAX: (519) 848-3948
E-MAIL: sales@bsmagri.com
Various U-bolts
used depending
on mounting pole
3.5" round,
4X4 post,
6X6 post
Page 1 of 3
Page 3 of 3
Page 2 of 3