HeatStar HSRP37GL Instructions D'utilisation Et Manuel Du Propriétaire page 6

Mounting Bracket Assembly
Follow the steps below to assemble and attach the wall mounting
brackets to the heater:
Mounting Bracket Hardware
00060
4x
FIGURE 3
2x 00060
1x 00059
4x 00089
4x 00090
*NOTICE: Wall mounts, part 00060, are equipped with two different
pairs of holes. The pair resulting in a shorter bracket is intended for
sidewall mounting and will provide the necessary 8" back clearance.
The pair of holes resulting in a longer bracket is intended for ceiling
mounting and will result in the necessary 13" to the top of the heater.
00088
00087
00089
2x 2x 27x
2x
00059
Step 1*
FIGURE 4
Outdoor Patio Heater
00090
1x 00087
1x 00088
16x
4x 00089
4x 00090
Repeat Step No. 1 and Step No. 2 to assemble the second Mounting
Bracket.
4x 00089
Repeat Step No. 3 to mount the second Mounting Bracket.
3x 00089
6
Operating Instructions and Owner's Manual
Step 2
FIGURE 5
Step 3
FIGURE 6
Step 4
FIGURE 7