Meec tools 015275 Mode D'emploi page 36

EN
Turn on pressure
Time set
Exit
The day
Every day
Exit
The day
Every day
Exit
Time now xx : xx
Time on xx : xx
Time off xx : xx
36
– Turn on pressure
– Time set
– Exit
Mark the alternative Time set and press OK to open the time set menu.
– The day
– Every day
– Exit
If the alternative The day is marked the time setting only applies for the
day – in other words this is a once only setting. Press OK to go to the time
settings.
– The day
– Every day
– Exit
If the alternative Every day is marked the time setting is continuous – it is
executed every day. Press OK to go to the time settings.
– Time now xx:xx
– Time on xx:xx
– Time off xx:xx
The required start and stop times can be set when the time settings are
shown on the display. Select the setting with the arrow buttons. Press OK to
exit and save the settings. To exit without saving any settings, press OK and
the up arrow button for at least 3 seconds.