Klein Tools CL800 Manuel D'instructions page 5

• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes are
connected.
• Use caution when working with voltages above 25V AC RMS or
60V DC. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock, replace
batteries when a low battery indicator appears.
• Do not attempt to measure resistance or continuity on a live
circuit.
• Always adhere to local and national safety codes. Use personal
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
AC
Resistance (in Ohms)
Double Insulated Class II
Diode
Hz
Frequency
°F/°C
Temperature (Fahrenheit / Celsius)
V Voltage (Volts)
Warning or Caution
To ensure safe operation and service of this meter, follow all
warnings and instructions detailed in this manual.
Risk of Electrical Shock
Improper use of this meter can lead to risk of electrical shock. Follow
all warnings and instructions detailed in this manual.
Risk of Electrical Shock
Application around and removal from UNINSULATED HAZARDOUS
LIVE conductors is permitted.
AC Measurement
Negative Reading
Auto Ranging
MIN Minimum Value Hold
Auto Power Off
Diode Test
M Mega (value x 10
micro (value x 10
Ohms
A Amps
Hz Frequency (Hertz)
°F
Degrees (Fahrenheit)
WARNINGS
SYMBOLS ON METER
SYMBOLS ON LCD
)
6
)
-6
AC/DC
Audible Continuity
Ground
Capacitance
%
Duty-cycle
Low Impedance
A Amperage (Amps)
DC Measurement
Data Hold
MAX Maximum Value Hold
Low Battery
Audible Continuity
k kilo (value x 10
m mili (value x 10
n nano (value x 10
V Volts
F Farads
% Duty Cycle
°C
Degrees (Celsius)
)
3
)
-3
)
-9
5