Selecting The Temperature Unit; Defrosting The Cooler; Replacing The Plug Fuse (12/24 V) - Dometic CDF18 Notice D'utilisation

CDF
7.7

Selecting the temperature unit

CDF26
You can switch the temperature display between Celsius and Fahrenheit. To do this,
proceed as follows:
1. Switch on the cooler.
2. Press the "SET" button twice.
3. Use the "+" and "–" buttons to set the cooling temperature.
✔ The set temperature unit then appears in the display for a few seconds. The dis-
play flashes several times before it returns to the current temperature.
CDF36, CDF46
You can switch the temperature display between Celsius and Fahrenheit. To do this,
proceed as follows:
1. Switch on the cooler.
2. Press the "SET" button twice.
3. Use the "ADJUST" button to set the Celsius or Fahrenheit temperature unit.
7.8

Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the vaporizer. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
A
NOTICE! Damage hazard
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
1. Take out the contents of the cooling device.
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the device.
4. Leave the cover open.
5. Wipe off the defrosted water.
7.9

Replacing the plug fuse (12/24 V)

1. Pull the adapter sleeve (fig. 7 4, page 4) off of the plug.
EN
Operation
17