Before First Use; Before Using The Appliance For The First Time; Initial Operation; Cleaning Accessories - Thermador MASTERPIECE Serie Guide D'utilisation Et D'entretien

Before First Use

Before you can use your new appliance, you must enter
certain settings. You must also clean the oven cavity and
accessories.
Before using the appliance for the first
time
Appliance must be properly installed by a qualified
▯
technician before use.
Remove all packing materials from inside and outside
▯
the oven.
While cool, wipe with a clean, damp cloth and dry.
▯
There may be a slight odor from your new appliance;
▯
this is normal and will disappear after a short time.
Optimum cooking results depend on proper cookware
▯
being used.
Read and understand all safety precautions and Use
▯
and Care Guide information.
Execute the following sections prior to operating.
▯

Initial operation

As soon as the appliance is connected to the power
supply, the first setting "Time of Day" appears on the
display.
Setting the time of day
Touch the bottom line.
1.
The time setting options are displayed.
Touch the "Hours" touch field and swipe to the left or
2.
right to select the current hour.
Touch the "Minutes" touch field and swipe to the left or
3.
right to select the current minute.
Touch the symbol to apply the settings.
8
4.
Setting the language
Swipe to the left to get to the next setting.
1.
Touch the bottom line.
2.
Swipe to the left or right to select the required
3.
language.
Touch the top line.
4.
Setting the time display
Swipe to the left to get to the next setting.
1.
Touch the bottom line.
2.
Swipe to the left or right to select how the clock should
3.
be displayed when the appliance is in stand-by mode.
Press the SETTINGS touch button to complete initial
4.
use.
Touch the Save touch field.
5.
"First start up finished" is displayed. The appliance
goes to stand-by mode.
Notes
You can change these settings at any time in the basic
▯
settings menu. ~ "Adjust Basic Settings" on page 23
After connecting the appliance to the power or
▯
following a power failure, the settings for initial use
may be shown in the display.

Cleaning accessories

Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
13