Keyboard; Radio Remote Control; Use; Switch On - Baxtran SML Mode D'emploi

4.3 KEYBOARD

TECLA DESCRIPTION OF THE FUNCTION
Switch on/ switch off the weighing hook
Tare/ x10 ( with long press)
Stanby mode / Normal mode
Set to zero

4.4 RADIO REMOTE CONTROL

Radio remote control allows the same use of the hook as when it is being used via the keyboard. The operator can choose any option (apart from
ON/OFF).
After every use of a key, the red LED diode should switch on. Otherwise it is necessary to change the battery of the remote control.
The scope of diaphanous space reached by the remote control is of approximately 20m.

5. USE

5.1 SWITCH ON

Press the key . The display is going to switch on and the weighing hook is going to start the self-testing. The self-testing finishes when the value of mass
0kg appears on the display.
The switch off is only possible when using the keyboard of the weighing hook.

5.2 SWITCH OFF

Press the key in the keyboard of the weighing hook.
20
1 Change the reading accuracy
2 Set to zero
3 Fix the value of the tare
4 Standby mode
USER'S MANUAL SML EN