Emerson MIDWAY ECO LED Mode D'emploi page 17

7. Remote Control Procedures
7.4
Your Emerson Ceiling Fan/Light Remote Control
consists of hand-held transmitter and a receiver which is
mounted under the fan ceiling cover.
When power is restored, push and hold the fan OFF
button ( ) for 3 to 5 seconds to set the code in the
receiver (Figure 29).
NOTE: The power indicator light on the remote control
will flash when the code is set.
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
7.5
The remote control is designed to separately control your
ceiling fan speed and light intensity (Figure 30).
If airflow is desired in the opposite direction, press the (
button on the remote control. The fan must be operating at
any speed for the reverse button to function. The blades
will turn in the opposite direction and reverse the airflow.
To set the desired fan speed, press the (
decrease the speed and the (
(Figure 30).
NOTE: The power indicator light on the remote control
will light up to indicate the new speed selected.
)
) button to
) to increase the speed
17
(Continued)
Figure 29
Figure 30
Please contact 1-800-654-3545 for further assistance
POWER INDICATOR
LIGHT
OFF
BUTTON
POWER INDICATOR
LIGHT
FAN SPEED
BUTTONS
AIRFLOW
BUTTON
emersonfans.com
ETL Model No.: CF955L