Home Page, Quick Controls, Mixer - dB Technologies ES-1203 Caractéristiques Techniques

4. HOME PAGE, QUICK CONTROLS, MIXER

You can view and configure the various ES1203 system parameters
using the OLED screen [4] and the rotary button [5] in the
Functions Control section.
Pressing [5] selects and confirms a page or parameter. Pressing it
for a few seconds jumps to other pages (shortcut).
Turning it lets you browse the various pages or, if you are in the
parameters on a page, increase or decrease the selected value.
HOME PAGE AND QUICK CONTROLS
You can perform the following basic operations from the HOME
page (figure 1):
A. set the configuration type
B. select the digital steering (coverage angle)
C. set the MAIN LEVEL system volume
D. access the input configuration pages
E. access the extended MENU (see the EXTENDED SETTINGS
MENU chapter)
From this page, you can use a shortcut to access
the system mixers (see the INPUT, OUTPUT AND AUX MIXERS
paragraph).
In the DOUBLE COLUMN STEREO configuration (figure
2), each individual ES1203 is identified as the right or
left Master or Slave. There must be one Master and one
Slave. Master means the ES1203 system to which the
inputs are connected and on which you set up all the
adjustments, which will consequently control the Slave
system. Therefore, adjustments will be disabled on the
Slave system.
Lets see the steps listed above in detail:
A. use [5] to select the left box (figure 1) and highlight it. Confirm and turn to select the appropriate
configuration. You can set the ES1203 system as:
• MONO
• STEREO
• DOUBLE COLUMN STEREO MASTER LEFT (ML)
• DOUBLE COLUMN STEREO SLAVE LEFT (SL)
• DOUBLE COLUMN STEREO MASTER RIGHT (MR)
• DOUBLE COLUMN STEREO SLAVE RIGHT (SR)
ES-1203
46
English
SELECT
SELECT
HOME PAGE
Figure 1
Figure 2
Cod. 420120253 REV. 1.0