Installation Cautions - Samsung RF263TE Serie Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This appliance should be positioned in such a
way that it is accessible to the power plug.
-
Failing to do so may result in an electric shock
or fi re due to electric leakage.
Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
Do not attempt to repair, disassemble, or
modify the appliance yourself.
-
Do not use any fuse(such as cooper, steel wire,
etc.) other than the standard fuse.
-
hen repairing or reinstalling the appliance is
required, contact your nearest service center.
-
Failing to do so may result in an electric shock,
fi re, problems with the product, or injury.
To get the best energy effi ciency of this
product, please leave all selves, drawers and
baskets on their original position like as above
illustration.
Never unplug your refrigerator by pulling on the
power cord. Always grip plug fi rmly and pull
straight out from the outlet.
-
Damage to the cord may cause a short-circuit,
fi re and/or electric shock.
Do not use aerosols near the refrigerator.
-
Aerosols used near the refrigerator may cause
an explosion or fi re.
Do not install this appliance near a heater,
infl ammable material.
Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where
gas may leak.
-
This may result in an electric shock or fi re.
• This refrigerator must be properly
installed and located in accordance with
the manual before you use it.
Connect the power plug in the proper position
with the cord hanging down.
-
If you connect the power plug upside down,
the wire can get cut off and cause a fi re or
electric shock.
When moving the refrigerator, be careful not to
roll over or damage the power cord.
-
This constitutes a fi re hazard.
Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
Keep the packing materials out of reach of
children.
-
There is a risk of death from suffocation if a
child puts the packing materials on his or her
head.
DA68-02601A.indb 03
DA68-02601A.indb 03
The appliance must be positioned so that the
plug is accessible after installation.
You need to remove all the protective plastic
fi lm before you initially plug the product in.
• The refrigerator must be safely
grounded.
-
Always make sure that you have
grounded the refrigerator before
attempting to investigate or repair any
part of the appliance. Power leakages
can cause severe electric shock.
Never use gas pipes, telephone lines or other
potential lightning attractors as an electrical
ground.
-
Improper use of the grounding plug can result
in a risk of electric shock. If it is necessary
to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating
of the extension cord should be AC115-120 V,
10 A, or more. If a grounding adapter is used,
make sure the receptacle box is fully grounded.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.

INSTALLATION CAUTIONS

CAUTION
• Allow suffi cient space to install the
refrigerator on a fl at surface.
-
If your refrigerator is not level, the internal
cooling system may not work correctly.
Keep the ventilation space in the appliance
enclosure or mounting structure clear of
obstruction.
Allow the appliance to stand for 2 hours after
installation.
We recommend you have installed this
refrigerator by a qualifi ed technician or service
company.
-
Failing to do so may result in an electric shock,
fi re, explosion, problems with the product, or
injury.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe,
plastic water pipe, or telephone line.
-
You must ground the refrigerator to prevent
any power leakages or electric shocks caused
by current leakage from the refrigerator.
-
This may result in an electric shock, fi re,
explosion, or problems with the product.
Safety information _03
2012.7.6 10:59:10 AM
2012.7.6 10:59:10 AM

Publicité

Table des Matières
loading

Table des Matières