Using The Control Panel - Samsung RF263TE Serie Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating your French Door
Refrigerator

USING THE CONTROL PANEL

8
1
2
3
( 1 ) Energy
Touching this button turns Energy Saver
Saver
Hold 3 sec for
Saver on, the Energy Saver icon lights.
°C °F
automatically turns on when power is
supplied to the refrigerator.
If condensation or water drops appear
on the doors, turn the Energy Saver
Touch and hold this button for 3
seconds to switch the temperature units
between °C and °F.
( 2 ) Freezer
Touch this button to set the freezer to
(Hold 3 sec
your desired temperature.
for Power
You can set the temperature between
Freeze)
-8°F and 5°F (between -23°C and
-15°C). Touch and hold this button for 3
seconds to decrease the time needed
to freeze products in the Freezer. It can
be helpful if you need to quickly freeze
easily spoiled items or if the temperature
in the freezer has warmed dramatically
(For example, if the door was left open).
( 3 ) Ice
Touch this button to select the ice or
water function. You can select water or
Type/Water
Hold 3 sec for
the types of ice(cubed/crushed ice).
Filter Reset
Each time you press the button, the
cubed and crushed
ice modes alternate and the Cubed or
Crushed ice icon lights up, indicating
your selection.
After you replace the water filter, touch
and hold this button for 3 seconds to
reset the water filter life indicator.
16_ operating
DA68-02601A(EN+FR+ES)-0.2.indb 12
( 4 ) Alarm
Hold 3 sec for
Lighting
4
5
6
7
( 5 ) Fridge
Hold 3 sec for
Power Cool
( 6 ) Ice Off
Hold 3 sec for
Child Lock
( 7 ) Ice Off
(RF263T**)
(RF263B/N**)
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes. The beeping
stops when you close the door. The door
alarm function is preset to On int the factory
releasing this button. You can turn it back
back on in the same fashion. The icon lights
up when the function is on.
If you touch and hold the Alarm/Lighting
button for 3 seconds, the dispenser LED
the button for 3 seconds again.
Touch this button to set the fridge to
your desired temperature. You can set
the temperature between 34 °F and 44 °F
(between 1°C and 7 °C ). Touch and hold
this button for 3 seconds to decrease
the time needed to cool products in
the Refrigerator. It can be helpful if you
need to quickly cool easily spoiled items
or if the temperature in the fridge has
warmed dramatically (For example, if the
door was left open).
If you don't want to make more ice,
Touching this button
for 3 seconds turns
on Child Lock which locks
the display
panel and dispenser buttons so the
buttons can not be used. The Child Lock
icon lights up to indicate you've activated
the Child Lock function. Press 3 seconds
to unlock. The Child Lock are not going to
lock the Cool Pantry. The lights and motors start
If you don't want to make more ice,
The icon will light up and the Ice-Maker
stops making ice.
We recommend you to stop ice
making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
-
W
t a
r e
s i
n
t o
b
e
n i
g
s
u
p
p
the refrigerator.
If the ice maker function is
ON, and the water Line is not
connected, there will be a water
valve noise from the back of the
unit, press the Ice Off (Hold 3sec
for child lock) button for less
than 3 seconds until the Ice Off
Indicator (
) illuminates.
2012.3.31 9:49:44 AM
e i l
d
o t

Publicité

Table des Matières
loading

Table des Matières